SUPRA-TOUCH Series
VentGrid™
VentGrid can provide optimized control and smoother transitions between steps than staged mode can, reducing energy and saving you money.
Secondary modifiers
Supra Touch is more than a temperature-based control. Monitor humidity, ammonia, and CO2 and then use those conditions to influence ventilation. For example, if the humidity is too high, Supra Touch can switch heaters on or increase ventilation to reduce it.
Completely programmable in as little as 15 minutes
We know that’s a bold statement, but Supra Touch provides a completely new user experience. The 5-inch display’s intuitive, easy-to-use screens allow you to quickly move through the menus and program the control. Save the settings to a USB stick and use it to set up new controls in seconds!
| Electircal Ratings | |||
| Incoming power | 120/230 VAC, 50/60 Hz | ||
| Control fuse | 1 A, 250 VAC non-time-delay glass | ||
| Variable stages | 10 A at 120/230 VAC, general-purpose (resistive) 7 FLA at 120/230 VAC, PSC motor 1/2 HP at 120 VAC, 1 HP at 230 VAC, PSC motor | ||
| Variable stage fuses | 15 A, 250 VAC ABC-type ceramic | ||
| General-purpose relays | 10 A at 120/230 VAC, general-purpose (resistive) 1/3 HPat 120 VAC, 1/2 HP at 230 VAC 360 W tungsten at 120 VAC | ||
| Alarm relay | 0.4 A at 125 VAC, 2.0 A at 30 VDC, resistive load 0.2 A at 125 VAC, 1.0 A at 30 VDC, inductive load | ||
| Variable DC (optional) | 0 to 10 VDC, 2K Ω load |
